$4.99Buy on Amazon.com
This White, Black, or Silver Batman Logo decal can be applied to any flat and clean surface such as car windows, trucks, computers, walls, and more. How to install a decal on any smooth surface. You will need any type of scotch tape, and a credit/debit card or squeegee. First, clean the flat surface where you wish to place your decal image. Second, above the image on your decal, apply tape, and stick it to your surface. Make sure your image is straight. Third, flip your decal up, and then slowly peel the transfer tape from your vinyl image, starting from the bottom, then working your way up. Discard vinyl backing. Fourth, starting from the scotch tape, slowly apply the transfer tape onto your surface by using a credit/debit card to guide your transfer tape down until your image appears flat on your surface. Then, use the credit/debit card to smooth out and press your image onto your surface. Once the transfer tape is relatively smooth, starting at one of the bottom corners, slowly peel your transfer tape up at a forty-five degree angle. Also, you should never pull your transfer tape directly out and away from your surface. Instead, pull along your surface. In addition, use a rocking motion from side to side. Decal installation complete. The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Dan's Decals.